×
新网 > 虚机资讯 > 正文

3台服务器Redis高可用哨兵模式

  • 作者:zccc
  • 来源:网络
  • 2020-07-13 12:03:00

建站服务器 3台服务器Redis高可用哨兵模式 学习 redis 高可用 3台服务器Redis高可用哨兵模式3.1 主redis配置3.2 从redis配置1. 介绍2.

建站服务器 3台服务器Redis高可用哨兵模式


学习 redis 高可用



3台服务器Redis高可用哨兵模式

3.1 主redis配置

3.2 从redis配置

1. 介绍

2. redis程序安装

3. 哨兵模式配置

3.3 启动redis和哨兵

4. 总结


1. 介绍

Redis 的 Sentinel 系统用于管理多个 Redis 服务器(instance), 该系统执行以下三个任务: 
监控(Monitoring): Sentinel 会不断地检查你的主服务器和从服务器是否运作正常。 
提醒(Notification): 当被监控的某个 Redis 服务器出现问题时, Sentinel 可以通过 API 向管理员或者其他应用程序发送通知。 
自动故障迁移(Automatic failover): 当一个主服务器不能正常工作时, Sentinel 会开始一次自动故障迁移操作, 它会将失效主服务器的其中一个从服务器升级为新的主服务器, 并让失效主服务器的其他从服务器改为复制新的主服务器; 当客户端试图连接失效的主服务器时, 集群也会向客户端返回新主服务器的地址, 使得集群可以使用新主服务器代替失效服务器。 
Redis Sentinel 是一个分布式系统, 你可以在一个架构中运行多个 Sentinel 进程(progress), 这些进程使用流言协议(gossip protocols)来接收关于主服务器是否下线的信息, 并使用投票协议(agreement protocols)来决定是否执行自动故障迁移, 以及选择哪个从服务器作为新的主服务器。 
虽然 Redis Sentinel 释出为一个单独的可执行文件 redis-sentinel , 但实际上它只是一个运行在特殊模式下的 Redis 服务器, 你可以在启动一个普通 Redis 服务器时通过给定 –sentinel 选项来启动 Redis Sentinel 。

环境 
CentOS7.2 
redis3.2.8

服务器IPredis端口哨兵端口服务器角色10.1.0.160637926379主10.1.0.161637926379从110.1.0.71637926379从22. redis程序安装

以下是单redis安装脚本,可适用于单redis使用。 
cat install_redis.sh

#!/usr/bin/env bash
# It\'s Used to be install redis.
# Created on 2016/10/19 11:18.
# @author: Chinge_Yang.
# Version: 1.0

function install_redis () {
#################################################################################################
       sourcepackage_dir=/tmp
       redis_install_dir=/usr/local/redis
       cd ${sourcepackage_dir}
       if [ ! -f redis-stable.tar.gz ]; then
               wget http://download.redis.io/releases/redis-stable.tar.gz
       fi
       cd ${makework_dir}
       tar -zxvf ${sourcepackage_dir}/redis-stable.tar.gz
       cd redis-stable
       make PREFIX=/usr/local/redis install
       return_echo make
       mkdir -p /usr/local/redis/{etc,var}
       rsync -avz redis.conf  /usr/local/redis/etc/
       sed -i \'s@pidfile.*@pidfile /var/run/redis-server.pid@\' $redis_install_dir/etc/redis.conf
       sed -i s@logfile.*@logfile $redis_install_dir/var/redis.log@ $redis_install_dir/etc/redis.conf
       sed -i s@^dir.*@dir $redis_install_dir/var@ $redis_install_dir/etc/redis.conf
       sed -i \'s/daemonize no/daemonize yes/g\' /usr/local/redis/etc/redis.conf
       sed -i \'s/^# bind 127.0.0.1/bind 127.0.0.1/g\' /usr/local/redis/etc/redis.conf
       rsync -avz ${sourcepackage_dir}/init.d/redis-server /etc/init.d/
       /etc/init.d/redis-server start
       chkconfig --add redis-server
       chkconfig redis-server on
#################################################################################################
}

install_redis

redis启停脚本示例: 
cat redis-server

#!/bin/bash 
#
# redis - this script starts and stops the redis-server daemon
#
# chkconfig:   - 85 15
# description:  Redis is a persistent key-value database
# processname: redis-server
# config:      /usr/local/redis/etc/redis.conf
# config:      /etc/sysconfig/redis
# pidfile:     /usr/local/redis/var/redis-server.pid

# Source function library.
. /etc/rc.d/init.d/functions

# Source networking configuration.
. /etc/sysconfig/network

# Check that networking is up.
[ $NETWORKING = no ] && exit 0

redis=/usr/local/redis/bin/redis-server
prog=$(basename $redis)

REDIS_CONF_FILE=/usr/local/redis/etc/redis.conf

[ -f /etc/sysconfig/redis ] && . /etc/sysconfig/redis

lockfile=/var/lock/subsys/redis-server

start() {
   [ -x $redis ] || exit 5
   [ -f $REDIS_CONF_FILE ] || exit 6
   echo -n $Starting $prog:
   daemon $redis $REDIS_CONF_FILE
   retval=$?
   echo
   [ $retval -eq 0 ] && touch $lockfile
   return $retval
}

stop() {
   echo -n $Stopping $prog:
   killproc $prog
   retval=$?
   echo
   [ $retval -eq 0 ] && rm -f $lockfile
   return $retval
}

restart() {
   stop
   start
}

reload() {
   echo -n $Reloading $prog:
   killproc $redis -HUP
   RETVAL=$?
   echo
}

force_reload() {
   restart
}

rh_status() {
   status $prog
}

rh_status_q() {
   rh_status >/dev/null 2>&1
}

case $1 in
   start)
       rh_status_q && exit 0
       $1
       ;;
   stop)
       rh_status_q || exit 0
       $1
       ;;
   restart)
       $1
       ;;
   reload)
       rh_status_q || exit 7
       $1
       ;;
   force-reload)
       force_reload
       ;;
   status)
       rh_status
       ;;
   condrestart|try-restart)
       rh_status_q || exit 0
           ;;
   *)
       echo $Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}
       exit 2
esac

redis-sentinel启停脚本示例:

#!/bin/bash 
#
# redis-sentinel - this script starts and stops the redis-server sentinel daemon
#
# chkconfig:   - 85 15
# description:  Redis sentinel
# processname: redis-server
# config:      /usr/local/redis/etc/sentinel.conf
# config:      /etc/sysconfig/redis
# pidfile:     /usr/local/redis/var/redis-sentinel.pid

# Source function library.
. /etc/rc.d/init.d/functions

# Source networking configuration.
. /etc/sysconfig/network

# Check that networking is up.
[ $NETWORKING = no ] && exit 0

redis=/usr/local/redis/bin/redis-sentinel
prog=$(basename $redis)

REDIS_CONF_FILE=/usr/local/redis/etc/sentinel.conf

[ -f /etc/sysconfig/redis ] && . /etc/sysconfig/redis

lockfile=/var/lock/subsys/redis-sentinel

start() {
   [ -x $redis ] || exit 5
   [ -f $REDIS_CONF_FILE ] || exit 6
   echo -n $Starting $prog:
   daemon $redis $REDIS_CONF_FILE --sentinel
   retval=$?
   echo
   [ $retval -eq 0 ] && touch $lockfile
   return $retval
}

stop() {
   echo -n $Stopping $prog:
   killproc $prog
   retval=$?
   echo
   [ $retval -eq 0 ] && rm -f $lockfile
   return $retval
}

restart() {
   stop
   start
}

reload() {
   echo -n $Reloading $prog:
   killproc $redis -HUP
   RETVAL=$?
   echo
}

force_reload() {
   restart
}

rh_status() {
   status $prog
}

rh_status_q() {
   rh_status >/dev/null 2>&1
}

case $1 in
   start)
       rh_status_q && exit 0
       $1
       ;;
   stop)
       rh_status_q || exit 0
       $1
       ;;
   restart)
       $1
       ;;
   reload)
       rh_status_q || exit 7
       $1
       ;;
   force-reload)
       force_reload
       ;;
   status)
       rh_status
       ;;
   condrestart|try-restart)
       rh_status_q || exit 0
           ;;
   *)
       echo $Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}
       exit 2
esac
3. 哨兵模式配置

3台主机相同设置:

按照前面单redis安装方法安装程序;

创建相应数据目录;

mkdir -p /usr/local/redis/data/redis
mkdir -p /usr/local/redis/data/sentinel
mkdir -p /usr/local/redis/sbin
vim /usr/local/redis/sbin/redis-server  # 使用上文中的示例脚本
vim /usr/local/redis/sbin/redis-sentinel  # 使用上文中的示例脚本
3.1 主redis配置

vim redis.conf

daemonize yes
pidfile /usr/local/redis/var/redis-server.pid
port 6379
tcp-backlog 128
timeout 0
tcp-keepalive 0
loglevel notice
logfile /usr/local/redis/var/redis-server.log
databases 16
save 900 1    
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename dump.rdb
dir /usr/local/redis/data/redis
masterauth 20170310
requirepass 20170310
slave-serve-stale-data yes
slave-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
slave-priority 100
appendonly yes
appendfilename appendonly.aof
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-entries 512
list-max-ziplist-value 64
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
aof-rewrite-incremental-fsync yes

群集文件配置 
vim sentinel.conf

port 26379
pidfile /usr/local/redis/var/redis-sentinel.pid
dir /usr/local/redis/data/sentinel
daemonize yes
logfile /usr/local/redis/var/redis-sentinel.log
sentinel monitor mymaster 10.1.0.160 6379 2
sentinel parallel-syncs mymaster 2
sentinel auth-pass mymaster 20170310
3.2 从redis配置

相对主redis配置,多添加了如下行:

slaveof 10.1.0.160 6379

vim redis.conf

daemonize yes
pidfile /usr/local/redis/var/redis-server.pid
port 6379
tcp-backlog 128
timeout 0
tcp-keepalive 0
loglevel notice
logfile /usr/local/redis/var/redis-server.log
databases 16
save 900 1    
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename dump.rdb
dir /usr/local/redis/data/redis
masterauth 20170310
requirepass 20170310
slaveof 10.1.0.160 6379  
slave-serve-stale-data yes
slave-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
slave-priority 90
appendonly yes
appendfilename appendonly.aof
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-entries 512
list-max-ziplist-value 64
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
aof-rewrite-incremental-fsync yes

vim sentinel.conf

port 26379
pidfile /usr/local/redis/var/redis-sentinel.pid
dir /usr/local/redis/data/sentinel
daemonize yes
logfile /usr/local/redis/var/redis-sentinel.log
sentinel monitor mymaster 10.1.0.160 6379 2
sentinel config-epoch mymaster 0
3.3 启动redis和哨兵

启动redis,主从都要启动 
/usr/local/redis/sbin/redis-server start 
启动群集监控,主从都要启动 
/usr/local/redis/sbin/redis-sentinel start

启动报错处理

错误1:
WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add \'vm.overcommit_memory = 1\' to /etc/sysctl.conf and then reboot or run the command \'sysctl vm.overcommit_memory=1\' for this to take effect.

解决方法(overcommit_memory)
1. `vim /etc/sysctl.conf`添加如下设置 , 然后`sysctl -p`
vm.overcommit_memory = 1
可选值:0、1、2。

0, 表示内核将检查是否有足够的可用内存供应用进程使用;如果有足够的可用内存,内存申请允许;否则,内存申请失败,并把错误返回给应用进程。
1, 表示内核允许分配所有的物理内存,而不管当前的内存状态如何。
2, 表示内核允许分配超过所有物理内存和交换空间总和的内存

注意:redis在dump数据的时候,会fork出一个子进程,理论上child进程所占用的内存和parent是一样的,比如parent占用 的内存为8G,这个时候也要同样分配8G的内存给child,如果内存无法负担,往往会造成redis服务器的down机或者IO负载过高,效率下降。所 以这里比较优化的内存分配策略应该设置为 1(表示内核允许分配所有的物理内存,而不管当前的内存状态如何)。
这里又涉及到Overcommit和OOM。

什么是Overcommit和OOM?
在Unix中,当一个用户进程使用malloc()函数申请内存时,假如返回值是NULL,则这个进程知道当前没有可用内存空间,就会做相应的处理工作。许多进程会打印错误信息并退出。
Linux使用另外一种处理方式,它对大部分申请内存的请求都回复yes,以便能跑更多更大的程序。因为申请内存后,并不会马上使用内存。这种技术叫做Overcommit。
当内存不足时,会发生OOM killer(OOM=out-of-memory)。它会选择杀死一些进程(用户态进程,不是内核线程),以便释放内存。

Overcommit的策略
Linux下overcommit有三种策略(Documentation/vm/overcommit-accounting):
0. 启发式策略。合理的overcommit会被接受,不合理的overcommit会被拒绝。
1. 任何overcommit都会被接受。
2. 当系统分配的内存超过swap+N%*物理RAM(N%由vm.overcommit_ratio决定)时,会拒绝commit。
overcommit的策略通过vm.overcommit_memory设置。
overcommit的百分比由vm.overcommit_ratio设置。

# echo 2 > /proc/sys/vm/overcommit_memory
# echo 80 > /proc/sys/vm/overcommit_ratio

当oom-killer发生时,linux会选择杀死哪些进程
选择进程的函数是oom_badness函数(在mm/oom_kill.c中),该函数会计算每个进程的点数(0~1000)。
点数越高,这个进程越有可能被杀死。
每个进程的点数跟oom_score_adj有关,而且oom_score_adj可以被设置(-1000最低,1000最高)。

错误2:
WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.

echo 511 > /proc/sys/net/core/somaxconn

错误3:
16433:X 12 Jun 14:52:37.734 * Increased maximum number of open files to 10032 (it was originally set to 1024).

新装的linux默认只有1024,当负载较大时,会经常出现error: too many open files

ulimit -a:使用可以查看当前系统的所有限制值

vim /etc/security/limits.conf
在文件的末尾加上

* soft nofile 65535
* hard nofile 65535

执行su或者重新关闭连接用户再执行ulimit -a就可以查看修改后的结果。

故障切换机制

启动群集之后,群集程序默认会在主从的sentinel.conf文件中加入群集信息

主:

port 26379
pidfile /usr/local/redis/var/redis-sentinel.pid
dir /usr/local/redis/data/sentinel
daemonize yes
logfile /usr/local/redis/var/redis-sentinel.log
sentinel myid aeff525d03a2234ef834808f7991761db03a1973
sentinel monitor mymaster 10.1.0.160 6379 2
sentinel parallel-syncs mymaster 2
sentinel auth-pass mymaster 20170310
# Generated by CONFIG REWRITE
sentinel config-epoch mymaster 0
sentinel leader-epoch mymaster 0
sentinel known-slave mymaster 10.1.0.71 6379
sentinel known-slave mymaster 10.1.0.161 6379
sentinel current-epoch 0

从1:

port 26379
pidfile /usr/local/redis/var/redis-sentinel.pid
dir /usr/local/redis/data/sentinel
daemonize yes
logfile /usr/local/redis/var/redis-sentinel.log
sentinel myid 01b1b7674abe648f6a2344fc5610e73b7e87cb8a
sentinel monitor mymaster 10.1.0.160 6379 2
sentinel config-epoch mymaster 0
# Generated by CONFIG REWRITE
sentinel leader-epoch mymaster 0
sentinel current-epoch 0

从2:

port 26379
pidfile /usr/local/redis/var/redis-sentinel.pid
dir /usr/local/redis/data/sentinel
daemonize yes
logfile /usr/local/redis/var/redis-sentinel.log
sentinel myid f1589f48079b3b3b536add4e2e01a36304aeba8c
sentinel monitor mymaster 10.1.0.160 6379 2
sentinel config-epoch mymaster 0
# Generated by CONFIG REWRITE
sentinel leader-epoch mymaster 0
sentinel current-epoch 0

模拟主故障

[root@show160 redis]# /usr/local/redis/bin/redis-cli -p 6379
127.0.0.1:6379> AUTH 20170310
OK
127.0.0.1:6379> DEBUG SEGFAULT
Could not connect to Redis at 127.0.0.1:6379: Connection refused
not connected> quit

从哨兵配置文件中可以看到当前的主库的已经发生了改变

4. 总结

redis的哨兵端口26379使用redis-cli可以连接查看哨兵相关信息,要想连接此高可用redis,可使用官方的连接客户端。使用哨兵监控当主故障后会自动切换从为主,当主启动后就变成了从。至少要3哨兵和3redis节点才能允许挂一节点还能保证服务可用性。

参考资料: 
https://redis.io/topics/sentinel 
http://www.redis.cn/topics/sentinel.html 
http://www.majunwei.com/view/201610302123020678.html


新网虚拟主机

  • 相关专题

免责声明:本文内容由互联网用户自发贡献自行上传,本网站不拥有所有权,也不承认相关法律责任。如果您发现本社区中有涉嫌抄袭的内容,请发送邮件至:operations@xinnet.com进行举报,并提供相关证据,一经查实,本站将立刻删除涉嫌侵权内容。

免费咨询获取折扣

Loading